Licenced software (R)

Licenced software

If you are interested to get a licenced software, please contact the Projects and Contracts Dept, - e-mail: info@vzlu.cz , tel: +420 225 115 332

Licence Agreement (only Czech version available)

You have to be registered and logged in to download the more detail description of the particular software (mostly available only in Czech language).

Name

Annotation

SW info

Control software for Firetest III

Control software is used for Firetest III device, which is used for specimen testing under CS-25 appendix F part I standard. Program is used for calibration, control and measured data acquisition, data are also displayed and post processed. Software us compatible with OS Windows 7 and later, programing platform is National Instrumensts Labview 2015. Data output is realised in text files in format compatible with Microsoft Excel program.

This project result was developed within a European project No. 640597 Future Sky Safety financed by the European Commission.

User manual (cz version)

Control software for firetest II (2017)

Control software is used for Firetest II device, which is used for specimen testing under CS-25 appendix F part III standard. Program is used for calibration, control and measured data acquisition, data are also displayed and post processed. Software us compatible with OS Windows 7 and later, programing platform is National Instrumensts Labview 2015. Data output is realised in text files in format compatible with Microsoft Excel program.

This project result was developed within a European project No. 640597 Future Sky Safety financed by the European Commission.

User manual (cz version)

Comm4CFD (2017)

Comm4CFD software is created and used for external communication with a CFD solver. It is focused on the prescription of aeroelastic deformation based on modal analysis. The software expands the existing CFD software capabilities, in our case of Edge software, however an analogous procedure could be done with any CFD tool.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual (cz version)

Software for a simulation of boundary layer control (2017)

This is a software for evaluating boundary layer parameters using non-stationary integral equations including terms for blowing or suction simulation. For the specified velocity distribution at the boundary layer edge and other necessary data, obtained for example from a CFD software, the result is the distribution of boundary layer parameters along the surface length.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual (cz version)

Software ModPre4CFD (2016)

ModPre4CFD software is designed to communicate with the CFD solver. With this program it is possible to determine aeroelastic deformation during the CFD calculation. Inputs are specified parameters resulting from the modal analysis.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual (cz version)

DoAF (2016)

Design of axial fan is describe in this paper. Software is created in MATLAB programe and should be run in this program or as Windows x64 compiled version.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual (cz version)

MLWing2 - load of elastic wings (2016)

The software MLWing2 is aimed for a load calculation of the thin elastic airplane wings (swept or with dihedral). The method of the solution is nonlinear lifting line theory. The wing can be deformed by bending and torque.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual (cz version)

AUSM+upDyMFoam (2016)

The modification of AUSM + up algorithm for use in OpenFOAM environment with dynamic mesh is described in this report. Algorithm AUSM + up is suitable for solving flow phenomena in a wide interval of speeds. Therefore this algorithm with support of dynamic mesh handling is suitable for the calculation of non-design parameters of centrifugal compressors near surge line.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual (cz version)

TMF_PRED_V2R1 (2016)

Software TMF_PRED is a numerical tool for prediction and analysis of thermo-mechanical fatigue.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

U-3D-LBC-TR (2016)

Software for calculation of three-dimensional unsteady flow with interaction of two linear blade cascades. The flow is modeled as turbulent with effect of the laminar-turbulent boundary layer transition. Both linear blade cascades are consist either from prismatic blades or from blades with only slightly varying profile along the span. Software is in form of the source code in "C" language as well as in form of binary executable file for operating system Linux. First input parameter of the software is a name of the main configuration file which contains an informations needed for run of the computation (such as names of files with computational mesh, names of files with the initial condition, names of files with values of the boundary conditions etc). Second parameter of the software is an integer which specifies number of CPUs. Output of the software is system of text files with parameters of the flow field which may be use for restart of the computation or for following analysis of the flow field. Another output is the data-file for the commercial postprocessor Tecplot.

This project result was developed within the TA04020129 project “Flow research in a multistage arrangement of axial turbine stages" with financial support from TA ČR.

User manual (cz version)

The Centrifugal Compressor Impeller Designer - VKK (2016)

This is a software for design of centrifugal compressor impeller. It is programmed in Python 3.0 and it is designed for Linux and Windows operating systems. Inputs are the basic design parameters of the centrifugal compressor and output is a 3D geometry of impeller.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

Software for the design of a circular supersonic nozzle (2016)

The software is intended for a design of a supesonic part of a Laval nozzle used in aerodynamic wind tunnels or other experimental devices, in a circular or planar configuration. The nozzle conture is evaluated by a method of characteristics derived for an axisymmetric flow (in case of the circular shape). The method is completed by a viscosity correction according to Head (turbulent boundary layer estimate).

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

TMF_PRED (2016)

Main goal of the TMF_PRED software is a prediction and analysis of thermo-mechanical fatigue. Software can be run within commercial software MATLAB. Both variants for low-cycle and high cycle fatigue are supported. Loading spectrum can be executed either from FEM input of via mathematical description. In the case analysis of FEM input, nodal results are analyzed. Software predicts damage progression based on loading spectrum. Uniaxial fatigue data are used for damage prediction.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

OSWaves (2015)

The software contains equations for calculation of parametres of oblique shock waves like pressure, temperature, density and enthropy. Also calculates these parametres in moist air and shows them in a chart.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Business secret

URANS-EASM (2015)

Software for limulation of turbulent unsteady flow of the perfect gas using a nonlinear turbulence model. Software is in form of the source code in "C" language as well as in form of binary executable file for operating system Linux. First input parameter of the software is a name of the main configuration file which contains an informations needed for run of the computation (such as names of files with computational mesh, names of files with the initial condition, names of files with values of the boundary conditions etc). Second parameter of the software is an integer which specifies number of CPUs. Output of the software is system of text files with parameters of the flow field which may be use for restart of the computation or for following analysis of the flow field. Another output is the data-file for the commercial postprocessor Tecplot.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual (cz version)

DUCT (2015)

The Duct program was designed for the fan noise propagation in duct simulation and analysis. The program calculates ATI transfer function from an arbitrary point of the inlet area of cylindrical or rectangular duct to an arbitrary point inside the duct. The program is also able to determine acoustic transfer impedance acting on the noise source on the inlet side of the duct.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

FANA23T2 (2015)

Direct aerodynamic analysis of single row axial fans without influence of stator vanes. The software performs computation of both: individual working conditions and computation of dimesion-less aerodynamic characteristics.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

OPTPROFIL version 2015

OPTPROFIL version 2015 is a software for airfoil optimization using evolutionary algorithms μ-ARMOGA and MODE1.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

MLWing (2015)

MLWing is a software intended for calculation of aerodynamic loading of slender wings (with sweep and dihedral) using the nonlinear lifting line method. Software uses 2-dimensional viscous or nonviscous airfoil characteristics to calculate 3D wing loading.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

AP_16 (2015)

It is used as the position analysis of the oscillating aeroelastic model in the wind tunnel. The analysis of the model movement is doing on base of the high speed camera record.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

DFDC_A3D (2015)

Additional functions of the software DFDC are implemented to enable more precise description of the airfoil characteristics with the aid of the parametric description. The extension enables to include sweep angle of the fan blade and the effects in the vicinity of the hub and the casing of the axial fan.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

pre- postprocesor DeFraMeCoCha

Multitask software application of database system - pre- postrocessor DeFraMeCoCha.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

Double CrACKERS (2015)

Software for automated modelling of two simultaneously increasing cracks Double CrACKERS.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

DeFraMeCoCha - enhanced version (2015)

Software for Determination of Fracture Mechanics Computational Characteristics - enhanced version with material models Forman, NASGRO, Walker and delamination models of composite material.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

Trans2AFGROW (2015)

Trans2AFGROW software translates sequence data from the format of loading machine to the formate of AFGROW. Software contains graphical user interface for information of the status and for control.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

UFM (2015)

The software transforms PRODERA output modal data in obsolete UFF format to the LMS TestLab input modal data in actual UFF format.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

SOBEL (2015)

Software evaluates snapshots from a video recording and enables to evaluate tensile strain from markings on the specimen.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

RALOG (2015)

Process generator is based on 2-parametric loading spectra developed by the rain-flow approach. The software is dedicated to - loading process reversal reconstruction characterized by random loading peeks arrangement and its rain-flow matrix identical to original loading process, - generating of a set of random loading processes with different load peek arrangement but keeping the same rain-flow matrix.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

scent-e (2015)

Program for the solution of the passive gas mixture flow (compressible viscous gas flow,3D URANS), using the finite volume method, and special handeling of numerical boundary conditions. Explicit time stepping implemented (low memory requirements). Unstructured meshes in general, multiprocessor (MPICH, OpenMPI) supported.

This result was developed within VG20122015098 project  " Operational assesment of toxic gas dispersion around the location of the accident/terrorist attack (2012-2015, MV0/VG)" provider MV.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

scent-i (2015)

Program for the solution of the passive gas mixture flow (compressible viscous gas flow,3D URANS), using the finite volume method, and special handeling of numerical boundary conditions. Implicit time stepping implemented, leading to faster solution of the complicated system of the conservation laws in 3D. Unstructured meshes in general, multiprocessor (MPICH, OpenMPI) supported.

This result was developed within VG20122015098 project  " Operational assesment of toxic gas dispersion around the location of the accident/terrorist attack (2012-2015, MV0/VG)" provider MV.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

BC_CFD_EXP  (2015)

Program pro stanovení rychlostního profilu větru ve volné krajině, definující tlakové zatížení výškové konstrukce větrem,dle zadaných parametrů a dále pro vyhodnocení vypočtených a naměřených hodnot.

Tento výsledek vznikl v rámci projektu TA02010382 "Zvýšení spolehlivosti vysokých tenkostěnných betonových a zděných konstrukcí při klimatických zatíženích (2012 - 2015)" s finanční podporou TA ČR.

User manual

Fana22_7 (2014)

Direct aerodynamic analysis of single row axial fans without influence of stator vanes. The software performs computation of both: individual working conditions and computation of dimesion-less aerodynamic characteristics.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

LokoMAT (2014)

Simulation LokoMAT software of source of compressed air on the locomotive. The mathematical model allows to simulate the specified mode and simulate the process of pressuring a source of compressed air, which releases the locomotives and trains.

This project result was developed within the TA03030465 project“  Locomotive entities (2013-2015, TA0/TA)” with financial support from TA ČR.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

OSPMF (2014)

Program for the solution of the RANS (k-omega turbulence model) equations, using finite volume method, and special handeling of numerical boundary conditions. Here we focus on the boundary condition by the preference of mass flow. It is based on the one-side modification of the Riemann problem and its solution.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

Accelero (2014)

The software used for the measurement with accelerometers on the Aeroelastic base balance. The software works in Windows and it needs the application RunTime Engine - National Instruments. Input parameters are the voltage signals from accelerometers and the outputs form the software are the acceleration data in the files.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

OPTKRIDLO version 2014

Software-package OPTKRIDLO is an optimizer of aerodynamic wings. It consists of a parameterization package, a package for their evaluation and evolutionary optimizer.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

EA1 version 2014

Pacjkage EA1 contains two multi-objective evolutionary micro-algorithms with range-adaptation MIARMOGA and MIARMODE.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

FATCOM V1.0 (2014)

FATCOM V1.0 Software for stiffness reduction estimate of fiber composites under uniaxial fatigue loading. Software FATCOM v1.0 was proposed in order to estimate stiffness reduction of fiber composites under uniaxial cyclic loading. Modified stiffness reduction model Liu-Lessard was implemented into this software.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

PEAKSREMOVING_V1 (2013)

A software module (subroutine) for the purposes of evaluation of dynamic signals in those cases where the source signal voltage for technical reasons is affected by the presence of relatively solitary interfering "peaks".

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

HTSTG_V1 (2013)

HTSTG_V1 module is designed for measuring and evaluating applications compiled in LabVIEW 2010, which provides voltage conversion of most variant strain gauge bridges, temperature gauge correction factor and temperature correction expansion of the material. It also allows the operation simple database of strain gauges.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

fidap2ffa (2013)

Software fidap2ffa is designed to convert computational grids from Fidap format, which is obtained by the grid generator GridPro, into the ffa format used by the CFD solver Edge.

User manual

fan_data (2013)

Software fan_data is designed to analyze data of axial fan CFD calculation. The main purpose is to extract relevant data from the flow field obtained from the CFD calculation as fan characteristics, radial distribution of quantites, averaged values. The result is saved in ASCII format useful for further processing.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

OptimTL 2013

This software is intended for a shape optimization of a turbine blade. The software package contains a parametrization tool, a genetic algorithm for optimization and a tool for evaluation of new designs using a CFD method. The method searches for a new blade profile design, which minimizes the loss of the kinetic energy and the total pressure loss and which also meets the conditions for prescribed values of the flow inlet angle, mass flow rate and moment of inertia of the cross section. 

This project result was developed within the TA02021336 project “ Research and Development of Small Sized Turbine Stage (2012-2015, TA0/TA)”  with financial support from TA ČR.

User manual

(CZ version)

STDGM3DNS1 (2013)

Software for numerical simulation of 3D compressible viscous flow in time-dependent domain using space-time discontinuous Galerkin method.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

C2WJUVS (2013)

Program for the solution of the RANS (k-omega turbulence model) equations, using finite volume method, and special handeling of numerical boundary conditions. It can be used for the solution of the compressible gas flow throught the blade cascade in 2D. Here we focus on the boundary condition for the supersonic inlet. It is based on the one-side modification of the Riemann problem and its solution.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

OPTPROFIL version 2013

Software-package OPTPROFIL is a universal optimizer of airfoils, consisting of the airfoil-parameterization routine and a multi-objective evolutionary optimizer, containing two evolutionary algorithms.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

OPTKRIDLO version 2013

Software-package OPTKRIDLO is an optimizer of aerodynamic wings. It consists of a parameterization package, a package for their evaluation and evolutionary optimizer.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

OPTKLAPKA version 2013

The package presented is a universal optimizer of aerodynamic flaps. It consist of three parts: parameterizer, evaluation package and the evolutionary optimizer package EA1.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

EA1 version 2013

Pacjkage EA1 contains two multi-objective evolutionary micro-algorithms with range-adaptation MIARMOGA and MIARMODE.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

Fana21_7 (2013)

Direct aerodynamic analysis of single row axial fans without influence of stator vanes. The software performs computation of both: individual working conditions and computation of dimesion-less aerodynamic characteristics.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

Lemmus v1.01 (2013)

This software is used to predict the material characteristics of unidirectional composites based on glass, carbon and aramid fibers.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

Troubadour v1.01 (2013)

This software is used to predict the material characteristics of woven fabric composites based on glass, carbon and aramid fibers.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

CFD models optimized solution combustion chambers for liquid fuel (2013)

As part of the task was tested designed for multi-zone algorithms for solving combustion chambers of jet engines. This algorithm was complemented by solving the heat transfer module. During the task solutions was tested developed turbulent model and its impact on the simulation of combustion.


This project result was developed within the TA03011285 project “ Research and development of combustion system for small turbine engine for alternative fuels (2013-2016, TA0/TA)”  with financial support from TA ČR.

User manual

ATS-MXP (2013)

Software for calculating steady turbulent flow in stage axial turbine. Turbine stage consists of a stator and rotor wheel. During calculation the speed of rotation of the rotor wheel is considered. The interface between the stator and the rotor part of the computational domain is formed by mixing plane. It is possible  to include uper bandage or shaft seal into a jet path. A configuration with a radial gap between the blade tips and shaft or hub is also possible. Gas is the ideal flowing medium. The software is in the form of source code in C language and in the form of a binary executable file for the Linux operating system.

This project result was developed within the FR-TI3/432 "Complex development of a turbine reaction stage with high efficiency", provider MIT (MPO).

User manual

(CZ version)

LBC-TRANS (2013)

The software allows you to model stationary turbulent flow in a direct blade cascades, including the phenomena of transition laminar boundary layer into turbulence. The model incorporates the criteria for modeling natural transition, shortened transition and the transition to secession. The software is in the form of source code in C language and in the form of a binary executable file for the Linux operating system. To enter, write the name of the main configuration file. Output of the program  are files containing the current parameters of the field intended to restart the calculation, or the analysis of the flow field, as well as data files for commercial Tecplot postprocessor.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

User manual

(CZ version)

oneCellReactionFoam (2013)

OneCellReactionFoam is a utility that allows the study of chemical kinetic parameters in one standalone computing environment OpenFOAMu cell. To improve determination of characteristic timescales are incorporated into the turbulent utility library.

This project result was developed within the TA03011285 project “ Research and development of combustion system for small turbine engine for alternative fuels (2013-2016, TA0/TA)”  with financial support from TA ČR.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

 PROPFM (2014)

 

PROPFM - Software for Calculation of Propeller Aerodynamic and Gyroscopic Terms for Whirl Flutter Analysis (version 2.0). Software tool for calculation of propeller aerodynamic and gyroscopic matrices (formally stiffness and damping matrices) for whirl flutter analysis. Input data are inertia, geometric and other parameters of a power plant (engine and propeller) system. Program generates the input data for follow-on whirl flutter analyses using NASTRAN program system. Program was prepared under MATLAB environment. It is compiled for MS windows platforms.

This project result was developed within the 7E12035 project “ Efficient Systems and Propulsion for Small Aircraft (2012-2015, MSM/7E)”  provider MŠMT.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

WHOUT (2014)

WHOUT - Software for MSC.NASTRAN Whirl Flutter Output Data Postprocessing (version 1.0). The program is intended for the postprocessing of the MSC.NASTRAN SOL 145 whirl flutter analyses. The reported version V1.0 is the baseline one of the SW. The program imports the NASTRAN *.f06 file. It exports the data in the specific forms as the data for V-g-f plotting, flutter summary, output to MS Excel etc. Program was prepared under MATLAB environment. It is compiled for MS windows platforms.

This project result was developed within the 7E12035 project “ Efficient Systems and Propulsion for Small Aircraft (2012-2015, MSM/7E)”  provider MŠMT.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

WKKCORR (2014)

WKKCORR - Software for Correction of Aerodynamic Matrix for MSC.NASTRAN Whirl Flutter Analysis (version 1.0). The program is intended for the correction of aerodynamic matrix for the flutter analysis performed using NASTRAN program system. Various types of corrections are applicable. Program generates the input data in the format of NASTRAN DMI cards as well as further outputs (text, excel). Program was prepared under MATLAB environment. It is compiled for MS windows platforms.

This project result was developed within the 7E12035 project “ Efficient Systems and Propulsion for Small Aircraft (2012-2015, MSM/7E)”  provider MŠMT.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

CLDI (2014)

Software for crack length evaluation from a digital image. Software evaluates snapshots from a video recording and enables to measure a crack length.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

DeFraMeCoCha (2014)

DeFraMeCoCha - Determination of Fracture Mechanics Computational Characteristics Software DeFraMeCoCha ( Determination of Fracture Mechanics Computational Characteristics) serves for assesment of computational characteristics on experimental basis. Enter software data are standard experimental records according to ASTM E 64, static strength characteristics and fractography analysis for retardation model FASTRAN.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

CrACKERS (2014)

CrACKERS - Crack modeling automatisation with a view to stress intesity factor computation. Software automatically models crack propagation. In every crack opening state, the special crack element CRAC2D is applied and the stress intensity factor is computed. Result is the functional dependence of the stress intensity factor on the crack length, fundamental for the crack growth rate computation in terms of damage tolerance analysis.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

STDGMFVM2DKW1 (2014)

Software for numerical simulation of the 2D compressible turbulent flow using combined finite volume - space-time discontinuous Galerkin method.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

Wingload3 (2014)

Wingload3 - calculation of elastic wing loading. Wingload3 is a software for calculation of aerodynamic loading of elastic slender wings which can be deformed by torsional and bending forces around elastic axis. Each wing is composed of trapezoids with: 2-dimensional viscous or nonviscous characteristics defined at the boundaries of these trapezoids, elastic axis and mass distribution. Aerodynamics is solved using NLWing2 software which is an implementation of nonlinear lifting line method. Results are aerodynamic characteristics of the wing and shape of deformation.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

DFDC_AER (2014)

Additional functions of the software DFDC make it easier to use thanks to input method for 2D airfoil characteristics for the rotor or stator blades. Inside the program the parametric description for the aerodynamic characteristics is preserved, however, standard block data description which represents aerodynamic data for a range of angles of attack can be used.

This project result was developed within the institutional support of the Ministry of Industry and Trade of the Czech Republic directed to the development of research organizations.

Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.

CZLOKO-sbRIO (2014)

Software for data acquisition from autonomous data logger. This software records data from temperature, pressure and flow sensors. Measured data are automatically save to SD card of autonomous data logger. This software is not depend on operating systems.

This project result was developed within the TA03030465 project“  Locomotive entities (2013-2015, TA0/TA)” with financial support from TA ČR.


Description of the functionality of the program is subject to trade secrets and may be conditionally made available on request.