Articles in conference proceedings (D)

sbornik-20160906130748

Articles in conference proceedings (D)

 

Title Authors Publication, ISBN, conference/publisher

Comparison of aerodynamic characteristics provided by wing with bell shaped lift distribution and generalized wings (2019)

Armand Drábek 
Pavel Hospodář

MATEC Web of Conferences 304, 02005 (2019), ISBN: 9781713800354, e-ISSN: 2261-236X, 9th EASN, 3.-6.9.2019, Athens, Greece

Technology of mass cataphoretic painting of small parts (2019)

Martina Pazderová a kol.

Progressive and non-traditional surface treatment technologies 16th International Professional Seminar, ISBN: 978-80-87583-31-9, Brno, 4.12.2019

Pulsed anodic oxidation of aluminum alloys (2019)

Jiří Bárta 
Simona Ivanová 
Martina Pazderová 
Viktorie Weiss 

Active galvanizers, 52. Annual National Conference, ISBN: 978-80-905648-5-5, Jihlava, 05.02.2019

Effect of wettability on ice adhesion of metal substrate (2019)

Simona Ivanová 
Martina Pazderová 
Věra Soukupová 
Viktorie Weiss

METAL 2019 Conference Proceedings, ISBN: 978-80-87294-92-5, pp. 1045-1050, Brno, 22.05.2019

The influence of carbon fillers on the electric conductivity on epoxy resin and its subsequent surface modification (2019)

Jiří Bárta 
Lenka Hýlová 
Martina Pazderová 
Viktorie Weiss

METAL 2019 Conference Proceedings, ISBN: 978-80-87294-92-5, pp. 1039-1044, Brno, 22.05.2019

Changing the wettability of materials by surface treatment (2019)

Simona Ivanová 
Martina Pazderová

Proceedings of the 61 Galvanic Conference - New Trends in Surface Treatment, ISBN: 978-80-227-4926-8, Bratislava, 20.6.2019

Comparison of two numerical approaches for simulation of fire with radiative heat transfer into solid walls (2019)

Vojtěch Běták

Proceedings of Computational Mechanics 2019, ISBN: 978-80-261-0889-4, pp. 6-9, Srní, 4.11.2019

Experimental investigation of 3D vortex structures in wake of hyperboloid-shaped model (2019)

Veronika Barraclough 

Topical Problems of Fluid Mechanics 2017, ISBN: 978-80-87012-61-1, ISSN: 2336-5781, Praha 15.02.2017

Study of Flow around Model of Cooling Tower by means of 2D Particle Image Velocimetry Measurement (2019)

Veronika Barraclough 

EPJ Web of Conferences, Vol. 143, 02004, ISSN:  21016275, Mariánské lázně, 15.11.2016

Experimental Investigation of Vortex Structures in Wake of Hyperboloid-Shaped Model by Means of 2D Particle Image Velocimetry Measurement (2019)

Veronika Barraclough 

EPJ Web of Conferences; vol. 180, 02004, ISSN: 21016275, Mikulov, 21.11.2017

Compilation of vortex filament of arch vortex in wake of cooling tower model (2019)

Veronika Barraclough 

Topical Problems of Fluid Mechanics 2018, ISBN: 978-80-87012-65-9, ISSN:  2336-5781, Prague, 21.2.2018

Experimental axial fan with geopolymer blades (2019)

Robin Hron 
Martin Kadlec 
František Martaus 
Roman Růžek

International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, vol. 18, No. 6.4, ISBN:  978-619-7408-71-3, ISSN: 1314-2704, pp. 385-392, Wien, Austria, 3.12.2018

Fatigue life estimation of riveted joints using crack growth concept (2019)

Pavel Kucharský 
Ivan Mlch 
Tomáš Mrňa 
Jakub Šedek

Proceedings of the International Conference on Computational Methods, Vol. 6, 2019, ISSN:  2374-3948, pp. 259-267, Singapur,  09.07.2019

Fatigue crack growth reconstitution in the specimen representing longitudinal joint of an integral panel (2019)

Lenka Michalcová 
Jakub Šedek

EAN 2019 - Conference Proceedings, ISBN: 978-802145766-9, pp. 496-501, Luhačovice, 3.6.2019

The validation of numerical models of potted inserts in sandwich structures based on experimental testing (2019)

Bohuslav Cabrnoch 
Michal Král 
Josef Kruml

EAN 2019 - Conference Proceedings, ISBN: 978-802145766-9, pp. 13-18, Luhačovice, 3.6.2019

Geopolymer laminate peel resistance of adhesive bonds with foam foam and honecomb cores (2019)

Robin Hron 
Martin Kadlec 
František Martaus 
Roman Růžek

International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, vol. 17, No. 63, ISBN:  978-619-7408-29-4, ISSN: 1314-2704, pp. 563-570, Vídeň, Rakousko, 27.11.2017

Mechanical Properties of Fibre Reinforced Geopolymer Composites Exposed to Operating Fluids (2019)

Robin Hron 
Martin Kadlec 
František Martaus

Solid State Phenomena, 2018, vol. 278, ISBN: 978-303571370-1, ISSN: 16629779, pp. 82-88, Barcelona, Spain, 05.02.2018

Compressive Properties of Geopolymer Matrix Composites (2019)

Robin Hron 
Martin Kadlec 
František Martaus

MATEC Web of Conferences, volume 179, art. No: 02003, ISSN:  2261236X, Wu-Han, 10.5.2019

Peel resistance of geopolymer sandwich with foam and honeycomb cores (2019)

Robin Hron 
Martin Kadlec 
František Martaus

EAN 2019 - Conference Proceedings, ISBN: 978-802145766-9, pp. 136-141, Luhačovice, 3.6.2019

Possibilities of airframe structures cost saving through reducing number of fasteners (2019)

Radek Doubrava 
Roman Růžek

EAN 2019 - Conference Proceedings, ISBN: 978-802145766-9, pp. 442-449, Luhačovice, 3.6.2019

Mechanical joining of thermoplastic composites-bearing behaviour simulation and validation (2019)

Roman Růžek 
Pavel Zděnek

EAN 2019 - Conference Proceedings, ISBN: 978-802145766-9, pp. 548-555, Luhačovice, 3.6.2019

Visualization study of the secondary flow within a linear blade cascade (2019)

Erik Flídr 
Tomáš Jelínek 
Milan Kladrubský

Topical Problems of Fluid Mechanics, ISBN: 978-80-87012-69-7, ISSN: 2336-5781, pp. 77-84, Prague, 20.02.2019

The role of experiment in the proposal of new approach for the prediction of stiffness reduction of composite structures under fatigue loading (2019)

Bohuslav Cabrnoch 
Michal Král 
Stanislav Holý

EAN 2019 - Conference Proceedings, ISBN: 978-802145766-9, pp. 225-231, Luhačovice, 3.6.2019

VHF notch antenna integrated in an aircraft winglet (2019)

Petr Vrchota

2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, ISBN:  978-1-7281-0692-2, ISSN:  1947-1491, pp. 329-330, Atlanta, USA, 07.07.2019

Contribution of conformal antennas towards sustainable aircraft (2019)

Aleš Prachař 
Miroslav Šmíd 
Petr Vrchota

EMuS 2019 - European Conference on Multifunctional Structures, ISBN: 978-84-949194-4-2, pp. 38-47, Barcelona, 11.-12.6.2019

Towards multi-objective design of EV-55 winglet with integrated VHF antenna (2019)

Petr Vrchota

EMuS 2019 - European Conference on Multifunctional Structures, ISBN: 978-84-949194-4-2, pp. 162-167, Barcelona, 11.-12.6.2019

From design towards manufacturing of winglets with integrated VHF antenna (2019)

Petr Vrchota

EMuS 2019 - European Conference on Multifunctional Structures, ISBN: 978-84-949194-4-2, pp. 153-161, Barcelona, 11.-12.6.2019

Multifoil optics for rocket experiments (2019)

Vladimír Dániel

Proceedings of SPIE - The International Society for Optical Engineering, Volume 11032, ISBN:  978-151062730-7, ISSN: 0277786X, Prague 3.4.2019

REX LE X-ray telescope experiment overview (2019)

Vladimír Dániel

Proceedings of SPIE - The International Society for Optical Engineering, 11032, art. no. 1103206, ISBN:  9781510627307,  ISSN: 0277786X, Prague 3.4.2019

Numerical simulation of hub-seal leakage flow interaction with the rotor blades (2019)

Petr Straka

AIP Conference Proceedings, volume 2189, 020021, ISBN: 978-0-7354-1936-0, ISSN: 0094-243X, Plzeň, 11.06.2019

Numerical Investigation of the Hub-Seal Mass Flow Rate Effect on the Axial Turbine Stage Efficiency (2019)

Petr Straka

EPJ Web of Conferences, Volume 213 (2019), ISBN: 2100-014X, Prague 13.11.2018

Application of digital image correlation to vibration analysis of the composite air inlet during acoustic loading (2019)

Jiří Běhal 
Martin Kadlec 
Pavel Zděnek

EAN 2019 - Conference Proceedings 2019, ISBN: 978-802145766-9, pp. 184-188, Luhačovice, 3.6.2019

Comparison of fatigue life of 2024 and 7475 friction welded joints with kissing bond defects (2019)

Petr Homola 
Robin Hron 
Martin Kadlec 
Roman Růžek

EAN 2019 - Conference Proceedings 2019, ISBN: 978-802145766-9, pp. 129-135, Luhačovice, 3.6.2019

Non-destructive Inspection of L410 NG Aircraft Structure during Full-Scale Fatigue Tests (2019)

Petr Bělský 
Michal Podstawka

Experimental Stress Analysis 2019, ISBN: 978-80-214-5766-9, pp. 420-425, Luhačovice 3.6.2019

Whirl Flutter-related Certification of Turboprop Aircraft (2019)

Jiří Čečrdle

Computational Mechanics 2019, ISBN: 978-80-261-0889-4, pp. 30-33, Srní 7.11.2019

Updating of Dynamic Model of Aircraft Structure with Wing Tip tanks According to Results of Ground Vibration Test (2019)

Jiří Čečrdle

AIAA SciTech 2019 Forum, ISBN: 978-1-62410-578-4, San Diego, 7.1.2019

An Improvement of measurement technique for high speed impact tests analysis (2019)

Petr Bělský 
Radek Doubrava 
Martin Oberthor 
Ondřej Vích 

57th annual conference on experimental stress analysis, pp. 33-41, ISBN: 978-80-214-5753-9, Luhačovice 3.6.2019

An improved technique for verification of high-speed impact simulation (2019)

Radek Doubrava 
Martin Oberthor 
Ondřej Vích

Procedia Structural Integrity, vol. 17, 2019, pp 190-197, ISSN: 2452-3216, ICSI 2019, Madeira 2.9.2019

Paint system suitable for extreme climatic conditions

Michal Havlík 
Martina Pazderová 
Kateřina Titěrová a kol.

Progresivní a netradiční technologie povrchových úprav, 16. mezinárodní odborný seminář, ISBN: 978-80-87583-31-9, pp 103-105, Brno (Myslivna) 4.-5.12.2019

Numerical simulation of combustion in small jet engines by using segregated algorithm (2019)

Vojtěch Běták

AIP Conference Proceedings 2189, 020004, ISBN: 978-073541936-0, ISSN: 0094243X, 18th Conference of Power system engineering, thermodynaics and fluid mechanics, Plzeň 11.-13.6.2019

Numerical Simulation of Flow Through a Simplified Model of the Shaft-Seal (2019)

Jaroslav Pelant
Petr Straka

Engineering Mechanics 2018, ISBN: 978-80-86246-88-8, ISSN: 1805-8248, pp. 821-824, Svratka 14.-17.5.2018

Compressible gas flow through the diffusible barriers and the porous media (2019)

Martin Kyncl 
Jaroslav Pelant

Engineering Mechanics 2018, ISBN: 978-80-86246-91-8, ISSN: 1805-8248, pp. 469 - 472, Svratka 14.-17.5.2018

Application of segregated approach on reacting flow field simulation in combustion chamber (2019)

Vojtěch Běták

Proceedings of the International conference Experimental Fluid Mechanics 2018, ISBN: 9781510840447, Prague 13.11.2018

Simulation of transonic flows through a turbine blade cascade with various prescription of outlet boundary conditions (2018)

Petr Straka
Petr Louda
Jaromír Příhoda

EPJ Web of Conferences, 180, art. no. 02056, ISSN: 21016275, EDP Sciences

Numerical Study of Shaft-Seal Parameters for Various Geometry Configurations and Operation Regimes (2018)

Petr Straka

EPJ Web of Conferences, 180, art. no. 02100, ISSN: 21016275, EDP Sciences

Methods of cleaning electrodes for bulk cataphoresis (2018)

Martin Jindřišek
Martina Pazderová
Petr Drašnar
Kamil Hylák
Jan Kudláček

IN-TECH 2018, Proceeding of International Conference on Innovative Technologies, ISSN: 0184-9069, pp. 213-218, University of Rijeka

Hromadné elektroforézní lakování kovových dílů (2018)

Martina Pazderová
Viktorie Weiss

44. Projektování a provoz povrchových úprav, ISBN: 978-80-906304-2-0, pp. 71-77, Jelínková Zdenka - PPK

Hodnocení odolnosti nátěrových systémů pomocí elektrochemické impedanční spektroskopie (2018)

Vít Jonák
Martina Pazderová

15. Mezinárodní odborný seminář - Progresivní a netradiční technologie povrchových úprav, ISBN: 978-80-87583-28-9, pp. 108-112, www.povrchari.cz

Stiffness reduction of glass/epoxy laminate under fatigue loading (2018)

Bohuslav Cabrnoch
Michal Král

Experimental Stress Analysis - 56th International Scientific Conference, EAN 2018 - Conference Proceedings, ISBN: 978-80-270-4062-9, pp. 202-208, Czech Society for Mechanics

Full Scale Fatigue Test and Failure Analysis of Advanced Jet Trainer Wing (2018)

Václav Horák
David Novotný

MATEC Web of Conferences, vol. 188, art. no. 04023, ISSN: 2261236X, EDP Sciences

Fatigue loading of polymer composite lap joints with washers inserted in the lay-up (2018)

Petr Bělský
Robin Hron
Martin Kadlec

Experimental Stress Analysis - 56th International Scientific Conference, EAN 2018 - Conference Proceedings, ISBN: 978-80-270-4062-9, pp. 131-135, Czech Society for Mechanics

Mechanical Properties of Fibre Reinforced Geopolymer Composites Exposed to Operating Fluids (2018)

Robin Hron
Martin Kadlec
František Martaus

Solid State Phenomena, vol. 278, ISBN: 9783035713701, ISSN: 1662-9779, Trans Tech Publications Ltd.

Influence of surface structure on ice formation (2018)

Jiří Bárta
Simona Ivanová
Martina Pazderová

60. Galvanická konferencia a nové trendy v povrchových úpravách, ISBN: 978-80-227-4805-6, pp. 85 - 90, STU Bratislava

Effect of inlet turbulence on compressible flow through the tip-section turbine blade cascade with supersonic inlet (2018)

Straka Petr
Rudas Bartoloměj
Fenderl David
Příhoda Jaromír

MATEC Web of Conferences, 168, art. no. 02007, ISSN: 2261236X, EDP Sciences

Numerical modelling of transonic centripetal flow in radial turbine blade cascade (2018)

Petr Straka

MATEC Web of Conferences, 168, art. no. 02008, ISSN: 2261236X, EDP Sciences

Application of laser shearography to vibration mode shape analysis of composite panel during acoustic load (2018)

Jiří Běhal
Martin Kadlec
Pavel Zděnek

Experimental Stress Analysis - 56th International Scientific Conference, EAN 2018 - Conference Proceedings, ISBN: 978-80-270-4062-9, pp. 457-463, Czech Society for Mechanics

Effect of interlaminar flaw on composite panel behaviour under acoustic loading (2018)

Jiří Běhal
Pavel Zděnek

MATEC Web of Conferences, vol. 188, art. no. 01005, ISSN: 2261236X, EDP Sciences

Non-destructive Methods for Damage Assessment of Composite Sandwich Structures (2018)

Petr Bělský
Martin Kadlec

MATEC Web of Conferences, 188, art. no. 01008, ISSN: 2261236X, EDP Sciences

Flow Structure behind a Wing at High Reynolds Numbers (2018)

Robert Kulhánek
Zdeněk Pátek
David Zacho

EPJ Web of Conferences, vol. 180, art. no. 02111, ISSN: 21016275, EDP Sciences

Thickness Effect Analysis on Fatigue Crack Propagation of 7475 Plate Material under Variable Amplitude Loading (2018)

Roman Růžek
Jakub Šedek

MATEC Web of Conferences, Volume 188, ISSN: 2261236X, EDP Sciences

Modelling the failure of near-edge impacted carbon fibre-reinforced composite subjected to shear loading (2018)

Jakub Šedek

IOP Conference Series: Materials Science and Engineering, ISSN: 17578981, Institute of Physics Publishing

Development of the plastic zone at the crack tip under cyclic loading in the middle-cracked tension specimen (2018)

Jakub Šedek

Experimental Stress Analysis - 56th International Scientific Conference, EAN 2018 - Conference Proceedings, ISBN: 978-80-270-4062-9, pp. 387-392, Czech Society for Mechanics

Study of close ground proximity on a flexible wing (2018)

Robert Kulhánek
Zdeněk Pátek

XXXIV OSTIV Congress - Congress programm and proceedings, ISBN: 978-3-947623-07-5, TU Braunschweig – Niedersächsisches Forschungszentrum für Luftfahrt

Experimental verification of jet engine composite inlet for bird and hail stone impact resistance (2018)

Petr Bělský
Radek Doubrava
Martin Oberthor
Karel Doubrava
Milan Dvořák

Experimental Stress Analysis - 56th International Scientific Conference, EAN 2018 - Conference Proceedings, ISBN: 978-80-270-4062-9, pp. 63-76, Czech Society for Mechanics

Bird and hail stone impact resistance analysis on a jet engine composite air inlet (2018)

Petr Bělský
Radek Doubrava
Martin Oberthor
Jan Raška

MATEC Web Conference, ISSN: 2261-236X, EDP Sciences

Quantitative Evaluation of Delamination in Composites Using Lamb Waves (2018)

Robin Hron
Lenka Michalcová

IOP Conference Series: Materials Science and Engineering, 326 (1), art. no. 012006, ISSN: 17578981, Institute of Physics Publishing

Delamination Growth Analysis in Mode I by Means of Lamb Waves (2018)

Lenka Michalcová

Materials Today: Proceedings, vol. 5, issue 13, part 2, ISSN: 2214-7853, pp. 26470-26475, Elsevier Ltd.

Fatigue Disbonding Analysis of Wide Composite Panels by Means of Lamb Waves (2018)

Petr Bělský
Pavel Kucharský
Lenka Michalcová
Lukáš Rechcígel

Proceedings of SPIE - The International SOciety for Optical Engineering, vol. 10599, art. no. 105991E, ISBN: 978-1-5106-1695-0, ISSN: 0277-786X, SPIE

Experimental verification of thickness effect on fatigue crack growth in AA 2124 plate (2018)

Petr Homola
Martin Kakos
Roman Růžek

Experimental Stress Analysis - 56th International Scientific Conference, EAN 2018 - Conference Proceedings, ISBN: 978-80-270-4062-9, pp. 347-352, Czech Society for Mechanics

Design and Experimental Verification of an Optimized Intercostal of a Tailored Blank (2018)

Roman Růžek
Jakub Šedek
Josef Křena

4th International Conference & Exhibition on Thermoplastic Composites, ISBN: 978-3-933339-31-7, pp. 162-165, MESSE BREMEN, M3B GmbH, Bremen, Germany

Monitoring of Delamination Growth on the MMB Specimens Using FBG Sensors and Electrical Resistance Measurement Method (2018)

Martin Kadlec
Milan Dvořák
Milan Růžička
Nikola Schmidová

Experimental Stress Analysis - 56th International Scientific Conference, EAN 2018 - Conference Proceedings, ISBN: 978-80-270-4062-9, pp. 367-373, Czech Society for Mechanics

Clocking of stators in one and half stage of axial steam turbine (2018)

Tomáš Jelínek
Martin Němec
Petr Milčák

EPJ Web of Conferences, vol. 180, art. no. 02071, ISSN: 21016275, EDP Sciences

Experimental Investigation of the Boundary Layer Transition on a Laminar Airfoil Using Infrared Thermography (2018)

Tomáš Jelínek

EPJ Web of Conferences, vol. 180, art. no. 02040, ISSN: 21016275, EDP Sciences

Delamination Growth under Mixed Mode I - Mode II Fatigue Loading in Polymer Composite (2018)

Martin Kadlec
Jakub Šedek

Experimental Stress Analysis - 56th International Scientific Conference, EAN 2018 - Conference Proceedings, ISBN: 978-80-270-4062-9, pp. 168-175, Czech Society for Mechanics

Aerodynamic and structural design of winglet with integrated VHF antenna (2018)

Petr Vrchota
Marta Martinez-Vazquez
Zdeněk Řezníček
Stefan Steeger
Martin Světlík

MATEC Web of Conferences, ISSN: 2261-236X, EDP Sciences

Experimental and CFD study of Krueger flaps (2018)

Jiří Čečrdle
Robert Kulhánek
Zdeněk Pátek
Petr Vrchota
Nikita Žižkovský

31st Congress of the International Council of the Aeronautical Sciences, ICAS 2018, ISBN: 978-3-932182-88-4, International Council of the Aeronautical Sciences

Experimental and numerical investigation of the boundary layer transition on the prismatic blade (2018)

Erik Flídr
Petr Straka
Jelínek Tomáš

XXIV BIENNIAL SYMPOSIUM ON MEASURING TECHNIQUES IN TURBOMACHINERY, ISBN: 978-80-87012-68-0, pp. 193-200, Institute of Thermomechanics of the Czech Academy of Sciences

Development and Verification of Simplified Boundary Condition of SaOB Actuator (2018)

Pavel Hospodář
Aleš Prachař
Petr Vrchota
Danny Dolgopyat
Avraham Seifert

58th Israel Annual Conference on Aerospace Sciences, IACAS 2018, ISBN: 9781510851399, Israel Annual Conference on Aerospace Sciences

Experimental investigation of the boundary layer transition on the prismatic blade using infrared thermography (2018)

Erik Flídr
Jelínek Tomáš

MATEC Web of Conferences, ISSN: 2274-7214, EDP Sciences

Characterization of the Suction-and-Oscillatory-Blowing actuator by the hybrid RANS-LES CFD (2018)

Aleš Prachař
Petr Vrchota

2018 Flow Control Conference, ISBN: 978-1-62410-554-8, American Institute of Aeronautics and Astronautics Inc.

Boundary layer investigation at the inlet of a linear blade cascade (2018)

Erik Flídr
Tomáš Jelínek
Milan Kladrubský

Topical Problems of Fluid Mechanics 2018, ISBN: 978-80-87012-65-9, pp. 83-90, Institute of Thermomechanics AS CR, v.v.i.

The simulation of the flow through the porous media and diffusible barriers (2018)

Martin Kyncl
Jaroslav Pelant

EPJ Web of Conferences, ISSN: 21016275, EDP Sciences

The high hall ventilation with the simplified simulation of the fan (2018)

Martin Kyncl
Jaroslav Pelant

EPJ Web of Conferences, ISSN: 21016275, EDP Sciences

Space-time discontinuous Galerkin method for the numerical simulation of viscous compressible gas flow with the k-omega turbulence model (2018)

Jan Česenek

EPJ Web of Conferences, ISSN: 21016275, EDP Sciences

Importance Truncation in the SU(3) Symmetry-adapted No-core Shell Model (2018)

Daniel Langr
Tomáš Dytrych
František Knapp
Tomáš Oberhuber

Acta Physica Polonica B, Proceedings Supplement, ISSN: 1899-2358, pp. 65-72, Jagiellonian University

Flutter Analysis of Twin Turboprop Aircraft with Tip-tanks (2018)

Jiří Čečrdle
Ondřej Vích

31st Congress of the International Council of the Aeronautical Sciences, ICAS 2018, ISBN: 978-3-932182-88-4, International council of the aeronautical sciences

Gust Alleviation of Aeroelastic Aircraft Using CFD Simulation (2018)

Aleš Prachař,
Petr Vrchota,
Pavel Hospodář

Transportation Research Procedia, ISSN 2352-1465, Elsevier B.V.

Wind tunnel measurement of flow and dispersion over urban area (2017)

Petr Michálek,
David Zacho

EPJ Web of Conferences, ISSN 2101-6275, EDP Sciences

Quantitative Evaluation of Delamination in Composites Using Lamb Waves (2017)

Lenka Michalcová,
Robin Hron

IOP Confrence Series: Materials Science and Engineering, ISSN 1757-8981, Institute of Physics Publishing

Wind Tunnel Application in Rail Vehicle Research and Development (2017)

Jan Červinka,
Zdeněk Pátek

Proceedings of XXIII. Conferences with International Participation Contemporary Problems in Rail Vehicles, ISBN 978-80-7560-085-1

Active Flow Separation Control Applied at Wing-Pylon Junction of a Wing Section in Landing Configuration (2017)

Petr Vrchota,
Aleš Prachař

AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting, ISBN 978-1-62410-447-3, American Institute of Aeronautics and Astronautics Inc.

Simplified Oscillatory Boundary Condition for Efficient CFD Simulation of AFC Effect (2017)

Petr Vrchota,
Aleš Prachař,
Pavel Hospodář, D. Dolgopyat, A. Seifert

Engineering Mechanics 2017, ISBN 978-80-214-5497-2, ACAD SCI CZECH REPUBLIC

Gust Alleviation of NASA Common Research Model Using CFD (2017)

Petr Vrchota,
Aleš Prachař,
Pavel Hospodář

Engineering Mechanics 2017, ISBN 978-80-214-5497-2, ACAD SCI CZECH REPUBLIC

FE Mesh Generation – Automated Crack Grow Modeling with a View to Stress Intensity Factor Computing (2017)

Jan Raška

Procedia Structural Integrity, ISSN 2452-3216, ELSEVIER SCIENCE BV

Implementation of interacting creep and fatigue under thermo-mechanical loading (2017)

Jiří Had

Engineering Mechanics 2017, ISBN 978-80-214-5497-2, ACAD SCI CZECH REPUBLIC

Design of a test facility for probe calibration (2017)

Jan Šimák

EPJ Web of Conferences, ISSN 2101-6275, EDP Sciences

Investigation of flow in axial stage of experimental turbine (2017)

Petr Straka, Jaroslav Pelant,
Martin Němec, Tomáš Jelínek,
Petr Milčák

EPJ Web of Conferences, ISSN 2101-6275, EDP Sciences

Simulation of transitional flows through a turbine blade cascade with heat transfer for various flow conditions (2017)

Petr Straka, Jaromír Příhoda, Martin Kožíšek, Jiří Fürst

EPJ Web of Conferences, ISSN 2101-6275, EDP Sciences

Calculation of transonic flow in radial turbine blade cascade (2017)

Petr Straka

AIP Conference Proceedings,  ISBN 978-0-7354-1572-0, American Institute of Physics Inc.

Modelling of flow in linear blade cascade with thick trailing edge at a lower Reynolds number (2017)

Petr Straka, Jaromír Příhoda

Engineering Mechanics 2017, ISBN 978-80-214-5497-2, Brno University of Technology, Institute of Solid Mechanics, Mechatronics and Biomechanics

Simulation of Transonic Flow Through a Mid-Span Turbine Blade Cascade with the Separation-Induced Transition (2017)

Petr Straka, Jaromír Příhoda,
David Fenderl

Topical Problems of Fluid Mechanics 2017, ISBN 978-80-87012-61-1

Simulation of transonic flow through a mid-span turbine blade cascade for various Mach numbers (2017)

Petr Straka, Jaromír Příhoda,
David Fenderl

AIP Conference Proceedings,  ISBN 978-0-7354-1572-0, American Institute of Physics Inc.

Fatigue Behaviour of Bolted Joints without Load Transfer (2017)

Martin Kadlec, Ivan Mlch,
Roman Růžek

EAN 2017 - 55th Conference on Experimental Stress Analysis 2017, ISBN 978-805533167-6, Technical University of Košice

Use of FBG Sensors for Delamination Growth Measurement under Mode I loading (2017)

Milan Dvořák, Martin Kadlec,
Nikola Schmidová, Milan Růžička

EAN 2017 - 55th Conference on Experimental Stress Analysis 2017, ISBN 978-805533167-6, Technical University of Košice

Fatigue behaviour of tailored blank thermoplastic composites with internal ply-drops (2017)

Petr Homola, Martin Kadlec,
Roman Růžek, Jakub Šedek

Procedia Structural Integrity, ISSN 2452-3216, ELSEVIER SCIENCE BV

X-ray Lobster Eye all-sky monitor for rocket experiment (2017)

Vladimír Dániel et al.

Proceedings of SPIE, ISBN 978-1-5106-0971-6, SPIE

Autonomous and semi-autonomous radio commanding of VZLUSAT-1 nanosatellite from ground control station in Pilsen (2017)

Vladimír Dániel,
Petr Svoboda et al.

International Conference on Applied Electronics, ISBN 978-8-0261-0642-5, IEEE Computer Society

Influence of UV varnish on mechanical resistance of paint system (2017)

Martina Pazderová, Kateřina Titěrová, Vladimír Špaček, Miroslava Banýrová

14. International Scientific Seminar - Progressive and Unconventional Surface Treatment Technologies, ISBN 978-80-87583-23-4, Povrcháři

Electrophoresis painting of metal parts (2017)

Viktorie Weiss,
Martina Pazderová

14. International Scientific Seminar - Progressive and Unconventional Surface Treatment Technologies, ISBN 978-80-87583-23-4, Povrcháři

Validation of high-speed impact numerical simulations on flat test panels for real structural analysis (2017)

Radek Doubrava, Petr Bělský,
Martin Oberthor

EAN 2017 - 55th Conference on Experimental Stress Analysis 2017, ISBN 978-805533167-6, Technical University of Kosice

Experimental verification of thickness effects on fatigue crack growth in an AA 7475 plate (2017)

Roman Růžek, Petr Homola,
Ivan Mlch

EAN 2017 - 55th Conference on Experimental Stress Analysis 2017, ISBN 978-805533167-6, Technical University of Kosice

Requirements to numerical simulations in aerodynamics (2017)

Nikola Žižkovský,
Armand Drábek

XXIII. Conferences with International Participation Contemporary Issues in Rail Vehicles, ISBN 978-80-7560-085-1, University of Pardubice, Jan Perner Transport Faculty

Design of multiplexer for electrical impedance tomography (2017)

Jan Cagáň,
Jakub Rösler

Materials Today: Proceedings, Volume 4, Issue 5, ISSN 2214-7853, Elsevier Ltd

Strain gauge measurement on small propeller using special in-house developed hardware (2017)

Jindřich Rosa,
Jan Cagáň,
Jakub Rösler

Materials Today: Proceedings, Volume 4, Issue 5, ISSN 2214-7853, Elsevier Ltd

Finite volume - space-time discontinuous Galerkin method for the numerical simulation of compressible turbulent flow in time dependent domains (2017)

Jan Česenek

EPJ Web of Conferences, ISSN 2101-6275, EDP Sciences

Modification of the Riemann Problem and the Application for the Boundary Conditions in Computational Fluid Dynamics (2017)

Martin Kyncl, Jaroslav Pelant

EPJ Web of Conferences, ISSN 2101-6275, EDP Sciences

On Memory Footprints of Partitioned Sparse Matrices (2017)

Daniel Langr, Ivan Šimeček

Proceedings of the 2017 Federated Conference on Computer Science and Information Systems, ISBN 978-8-3946-2537-5, Institute of Electrical and Electronics Engineers Inc.

Numerical evaluation of barely visible impact damage in a carbon fibre-reinforced composite panel with shear loading (2017)

Jakub Šedek, Petr Bělský

WIT Transactions on Engineering Sciences, ISBN 978-178466197-7, WITPress

Numerical Investigation of 3-D Strain Constraint in Lab Test Specimens (2017)

Jakub Šedek

EAN 2017 - 55th Conference on Experimental Stress Analysis 2017, ISBN 978-80-553-3167-6, Technical University of Košice

Aircraft Wing Flutter Assessment Considering Damage Tolerance based Failure States (2017)

Jiří Čečrdle, Jan Raška

Engineering Mechanics 2017, ISBN 978-80-214-5497-2, Institute of Thermomechanics of the CAS

Wind Tunnel Test of Whirl Flutter Aeroelastic Demonstrator (2017)

Jiří Čečrdle,
Petr Malínek,
Ondřej Vích

58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, ISBN 978-1-62410-453-4, AIAA - The American Institute of Aeronautics and Astronautics, USA

Numerical simulation of the passive gas mixture flow (2016)

Martin Kyncl,
Jaroslav Pelant

EPJ Web of Conferences, ISSN 2101-6275, EDP Sciences

Development of high entropy alloys electrochemically deposited from non-aqueous solutions (2016)

Jiří Bárta
Simona Ivanová
Martina Pazderová
Vít Jeníček

58. Medzinárodná galvanická konferencia, 978-80-227-4575-8, Faculty of chemical and food technology, STU in Bratislava

Simulation of propeller effect in wind tunnel (2016)

Robert Kulhánek
Zdeněk Pátek
Jan Červinka Kumar Vineet

ICAS 2016 - CD-ROM PROCEEDINGS, 978-3-932182-85-3, International Council of the Aeronautical Sciences

Structural health monitoring of a wing-panel splice joint using acoustic emission (2016)

Roman Růžek
Lenka Michalcová

8th European Workshop on Structural Health Monitoring, EWSHM 2016, 978-151082793-6, NDT.net

Mechanical behaviour of thermoplastic rib under loading representing real structure condition (2016)

Roman Růžek
Jakub Šedek
Martin Kadlec
Pavel Kucharský

EAN 2016 - 54th International Conference on Experimental Stress Analysis, 978-80-261-0624-1, University of West Bohemia

Test and Simulation of Energy Absorption System (2016)

Radek Doubrava

EAN 2016 - 54th International Conference on Experimental Stress Analysis, 978-80-261-0624-1, University of West Bohemia

Block iterators for sparse matrices (2016)

Daniel Langr
Ivan Šimeček
Tomáš Dytrych

Proceedings of the 2016 Federated Conference on Computer Science and Information Systems, FedCSIS 2016, 978-836081090-3, Institute of Electrical and Electronics Engineers Inc.

Experimental and computational study of ground effect on airfoil section (2016)

Petr Vrchota
Zdeněk Pátek
Jan Červinka

ICAS 2016 - CD-ROM PROCEEDINGS, 978-3-932182-85-3, International Council of the Aeronautical Sciences

Modelling of unsteady secondary vortices generated behind the radial gap of the axial turbine blade wheel (2016)

Petr Straka

ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering, 978-618-82844-0-1, National Technical University of Athens

Simulation of Compressible Flow Through the Tip-Section Turbine Blade Cascade with the Unsteady Interaction of the Shock wave with Shear Layers (2016)

Petr Straka et al.

Topical Problems of Fluid Mechanics 2016, 978-80-87012-58-1, Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i.

Comparison of linear and nonlinear subgrid scale model for hybrid RANS/LES modelling (2016)

Petr Straka

AIP Conference Proceedings, 978-073541402-0, American Institute of Physics Inc.

Numerical simulation of transitional flows with heat transfer (2016)

Petr Straka et al.

AIP Conference Proceedings, 978-073541402-0, American Institute of Physics Inc.

Numerical simulation of high-swirl flow in axial turbine stage (2016)

Petr Straka

EPJ Web of Conferences, ISSN: 21016275, EDP Sciences

Extension of the algebraic transition model for the wall roughness effect (2016)

Petr Straka
Jaromír Příhoda

EPJ Web of Conferences, ISSN: 21016275, EDP Sciences

Hybrid RANS/LES modelling of secondary flow in axial turbine stage (2016)

Petr Straka
Jaroslav Pelant

Engineering mechanics 2016 - Book of full texts, 978-80-87012-59-8, Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i.

VZLUSAT-1: verification of new materials and technologies for space (2016)

Vladimír Dániel et al.

Proceedings of SPIE - The International Society for Optical Engineering, 978-1-5106-0347-9, SPIE

Terrestrial gamma-ray flashes monitor demonstrator on CubeSat (2016)

Vladimír Dániel
Vojtěch Zadražil  et al.

Proceedings of SPIE - The International Society for Optical Engineering, 978-1-5106-0347-9, SPIE

Modelling of thermo-mechanical fatigue on engine generator turbine (2016)

Jiří Had
Tomáš Jamróz

Engineering mechanics 2016 - Book of full texts, 978-80-87012-59-8, Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i.

Application of synthetic jets actuators in wing-pylon junction area to improve the high lift performances (2016)

Petr Vrchota

ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering, Vol. 3, 978-618-82844-0-1, National Technical University of Athens

Atmospheric Dispersion Simulations - Passive Gas Mixture Flow (2016)

Martin Kyncl
Jaroslav Pelant

Engineering mechanics 2016 - Book of full texts, 978-80-87012-59-8, Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i.

The inlet and outlet boundary problem with the preference of mass flow (2016)

Martin Kyncl
Jaroslav Pelant

ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering, Vol IV, 978-618-82844-0-1, National Technical University of Athens

Finite volume - space-time discontinuous Galerkin method for the numerical simulation of compressible turbulent flow in time dependent domains (2016)

Jan Česenek

Proceedings of the International conference Experimental Fluid Mechanics 2016, 978-80-260-5375-0, Polypress s.r.o.

Strain gauge measurement on small propeller using special in-house developed hardware (2016)

Jindřich Rosa
Jan Cagáň

Book of abstracts / 33rd Danubia Adria Symposium on Advances in Experimental Mechanics, 978-961-94081-0-0, DANUBIA Adria Symposium on Advances in Experimental Mechanics

Experimental characterization of strain gauges for high-temperature applications (2016)

Jindřich Rosa
Jan Cagáň
Filip Rösler

EAN 2016 - 54th International Conference on Experimental Stress Analysis, 978-802610624-1, University of West Bohemia

Numerical and experimental study of a cooling for vanes in a small turbine engine (2016)

Jan Šimák
Jan Michálek

EPJ Web of Conferences, ISSN: 21016275, EDP Sciences

Application of Whirl Flutter Optimization-based Solution to Full-span Model of Twin Turboprop Aircraft (2016)

Jiří Čečrdle

ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering, Vol II, 978-618-82844-0-1, National Technical University of Athens

Mechanical Concept of Whirl Flutter Aeroelastic Demonstrator (2016)

Jiří Čečrdle
Jaromír Maleček
Ondřej Vích

Engineering mechanics 2016 - Book of full texts, 978-80-87012-59-8, Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i.

Development and Wind Tunnel Test of W WING Whirl Flutter Aeroelastic Demonstrator (2016)

Jiří Čečrdle
Jaromír Maleček
Ondřej Vích
Petr Malínek

57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference Proceedings, 978-1-62410-392-6, American Institute of Aeronautics and Astronautics Inc.

Study of localized vibrations of mistuned blades of centrifugal compressor (2016)

Tomáš Jamróz

Engineering mechanics 2016 - Book of full texts, 978-80-87012-59-8, Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i.

Effect of end-wall boundary layer and inlet turbulence on the flow field structures in the turbine stage (2016)

Tomáš Jelínek
Petr Straka
Václav Uruba

AIP Conference Proceedings, 978-0-7354-1402-0, American Institute of Physics Inc.

Flow parameters simulation technique in annular turbine cascade inlet (2016)

Tomáš Jelínek
Martin Němec
Václav Uruba

Engineering mechanics 2016 - Book of full texts, 978-80-87012-59-8, Institute of Thermomechanics, Academy of Sciences of the Czech Republic, v.v.i.

Wind tunnel studies of gas dispersion over complex terrain (2016)

Petr Michálek
David Zacho

EPJ Web of Conferences, ISSN: 21016275, EDP Sciences

Fatigue test of an integrally stiffened panel: Prediction and crack growth monitoring using acoustic emission (2016)

Lenka Michalcová
Roman Růžek

Procedia Structural Integrity, ISSN: 2452-3216, Elsevier Science B.V.

On-line Monitoring of Resin Flow Using Capacitive Sensor Array During VaRTM Production Process (2016)

Jan Cagáň
Jindřich Rosa

54th international conference on Experimental Stress Analysis, 978-80-261-0624-1, University of West Bohemia

Design of Multiplexer for Electrical Impedance Tomography (2016)

Jan Cagáň
Jakub Rösler

Book of abstracts / 33rd Danubia Adria Symposium on Advances in Experimental Mechanics, 978-961-94081-0-0, DANUBIA Adria Symposium on Advances in Experimental Mechanics

Optimization of composite airframe rib using tailoring blank technology (2016)

Jakub Šedek

EAN 2016 - 54th International Conference on Experimental Stress Analysis, 978-802610624-1, University of West Bohemia

Experimental Investigation of Mistuned Centrifugal Compressor (2016)

Tomáš Jamróz
Petr Malínek

Turbostroje 2016, 978-80-270-0055-5, Doosan Škoda Power

Physical modeling of gas dispersion over urban area (2016)

Petr Michálek
David Zacho

AIP Conference Proceedings, 978-073541402-0, American Institute of Physics Inc.

Fastener stiffness measurement methodology (2016)

Martin Kadlec
Pavel Kucharský

Experimantal Stress Analysis 2016, 978-802610624-1, University of West Bohemia

Comparative Study of Prediction Methods for Fatigue Life Evaluation of an Integral Skin-Stringer Panel under Variable Amplitude Loading (2015)

Jakub Šedek, Roman Růžek, Jan Raška, Jiří Běhal

Procedia Engineering, Volume 114, 2015, pages 124-131

Crack Growth Monitoring of CFRP Composites Loaded in Different Environmental Conditions Using Acoustic Emission Method (2015)

Lenka Michalcová, Martin Kadlec

Procedia Engineering, Volume 114, 2015, pages 86-93

CFRP Fuselage Panels Behaviour in Compression

Ing. Dr. Roman Růžek
Ing. Martin Kadlec Ph.D.
Konstantinos Tserpes
Evangelos Karachalios

53rd Conference on Experimental Stress Analysis - Experimental Stress Analysis 2015

Evaluation of a bond joint in the carbon weave reinforced thermoplastic manufactured by stacked tailored blanks

Ing. Jakub Šedek
Ing. Robin Hron
Ing. Martin Kadlec Ph.D.

53rd Experimental Stress Analysis (EAN2015)

Vývoj a zkoušky mořících inhibitorů snižujících nebezpečí vodíkové křehkosti

Ing. Miroslav Valeš Ph.D.
Ing. Markéta Bláhová
Ing. Petr Szelag
Alena Faltýnková

57. MEZINÁRODNÁ GALVANICKÁ KONFERENCIA

Vývoj inhibitorů koroze pro moření v kyselých roztocích

Ing. Miroslav Valeš Ph.D.
Ing. Markéta Bláhová
Ing. Petr Szelag
Alena Faltýnková

48. CELOSTÁTNÍ AKTIV GALVANIZÉRŮ

Mathematical model of propeller control system

Ing. Jaroslav Braťka
Ing. Jozef Zakucia Ph.D.

Modern safety technologies in transportation MOSATT 2015

Mathematical model of hydromechanical part of FADEC for turboshaft aircraft engine

Ing. Jozef Zakucia Ph.D.
Ing. Jaroslav Braťka
Ing. Roman Kříž

Modern technologies in transportation

Finite volume - space-time discontinuous Galerkin method for the solution of compressible turbulent flow

Mgr. Jan Česenek Ph.D.

Proceedings of the International conference Experimental Fluid Mechanics 2015

Numerical Simulation of the Passive Gas Mixture Flow

RNDr. Martin Kyncl Ph.D.
RNDr. Jaroslav Pelant CSc.

EPJ Web of Conferences, Volume 92, 2015, EFM14 – Experimental Fluid Mechanics 2014

Numerical Simulation of the Gas Dispersion

RNDr. Martin Kyncl Ph.D.
RNDr. Jaroslav Pelant CSc.

EFM15 – Experimental Fluid Mechanics 2015

Analysis of the Boundary Problem with the Preference of Mass Flow

RNDr. Martin Kyncl Ph.D.
RNDr. Jaroslav Pelant CSc.

Engineering Mechanics 2015

Improvement of CFD aerodynamic characteristics using modal deformation

Ing. Petr Vrchota Ph.D.
RNDr. Aleš Prachař Ph.D.

55th Israel Annual Conference on Aerospace Sciences 2015

Improvement of CFD results of NASA CRM by online mesh deformation using modal analysis of a wing

Ing. Petr Vrchota Ph.D.
RNDr. Aleš Prachař Ph.D.

33rd AIAA Applied Aerodynamics Conference

X-ray monitoring for astrophysical applications on Cubesat

Ing. Vladimír Dániel Ph.D.

SPIE 9510, EUV and X-ray Optics: Synergy between Laboratory and Space IV, 951005

Analysis of thermo-mechanical fatigue of generator turbine

Ing. Jiří Had, Ing. Tomáš Jamróz

PROCEEDINGS OF THE INTERNATIONAL SCIENTIFIC CONFERENCE MODERN SAFETY TECHNOLOGIES IN TRANSPORTATION

Surface epoxy layer filled with particulate fillers

Mgr.. Jakub Podzimek
Ing. Zdeněk Mašek

Polymerní kompozity 2015

Structural Analysis of Bladed Disk

Ing. Tomáš Jamróz
Ing. Jiří Had

Proceedings of the International Scientific Conference Modern Safety Technologies in Transportation

Numerical prediction of soot formation in combustion chamber for small jet engines

Ing. Vojtěch Běták
Ing. Jan Kubata

EFM15 - Experimental Fluid Mechanics 2015

Stiffness reduction model for composite materials under cyclic loading - identification of model parameters

Ing. Michal Král
Ing. Stanislav Holý

32nd DANUBIA-ADRIA SYMPOSIUM ON ADVANCES IN EXPERIMENTAL MECHANICS

The proposal and experimental verification of the phenomenologically based model for calculations of composites structures subjected to cyclic loading

Ing. Michal Král
Ing. Bohuslav Cabrnoch Ph.D.
Ing. Stanislav Holý

Polymerní kompozity 2015

Effect of mechanical properties of fasteners on stress state and fatigue behaviour of aircraft structures as determined by damage tolerance analyses

Ing. Radek Doubrava Ph.D.

Proceda Engineering of 3rd International Conference on Material and Component Performance under Variable Amplitude Loading, VAL 2015

Test and numerical assessment of fuel tank damage

Ing. Radek Doubrava Ph.D.
Ing. Lucie Nováková

Proceedings of 4th International Conference of Engineering Against Failure (ICEAF IV)